Deep link provided by CitebiteClose this shade
Source: http://esag.harvard.edu/rice/RicePubs.html
1) G. C. Sih
and J. R. Rice, "The Bending of Plates of Dissimilar Materials with
Cracks", Journal of Applied Mechanics, 31, 1964, pp. 477-482.
2) J. R. Rice
and E. J. Brown, "Discussion of 'Random Fatigue Failure of a Multiple Load
Path Redundant Structure' by Heller, Heller and Freudenthal", in Fatigue:
An Interdisciplinary Approach (eds. J. Burke, N. Reed and V. Weiss), Syracuse
University Press, 1974, pp. 202-206.
3) J. R. Rice
and F. P. Beer, "On the Distribution of Rises and Falls in a Continuous
Random Process", Transactions ASME (Journal of Basic Engineering), 87D,
1965, pp. 398-404.
4) J.
R. Rice and G. C. Sih, "Plane Problems of Cracks in Dissimilar
Materials", Journal of Applied Mechanics, 32, 1965, pp. 418-423.
5) J. R. Rice,
F. P. Beer and P. C. Paris, "On the Prediction of Some Random Loading
Characteristics Relevant to Fatigue", in Acoustical Fatigue in Aerospace
Structures (eds. W. Trapp and D. Forney), Syracuse University Press, 1965, pp.
121-144.
6) J. R. Rice,
"Starting Transients in the Response on Linear Systems to Stationary
Random Loadings", Journal of Applied Mechanics, 32, 1965, pp. 200-201.
7) J. R. Rice,
"Plastic Yielding at a Crack Tip", in Proceedings of the 1st
International Conference on Fracture, Sendai, 1965 (eds. T. Yokobori, T.
Kawasaki, and J. L. Swedlow), Vol. I, Japanese Society for Strength and
Fracture of Materials, Tokyo, 1966, pp. 283-308.
8) J. R. Rice,
"An Examination of the Fracture Mechanics Energy Balance from the Point of
View of Continuum Mechanics", in Proceedings of the 1st International
Conference on Fracture, Sendai, 1965 (eds. T. Yokobori, T. Kawasaki, and J. L.
Swedlow), Vol. I, Japanese Society for Strength and Fracture of Materials,
Tokyo, 1966, pp. 309-340.
9) J. R. Rice
and F. P. Beer, "First Occurrence Time of High Level Crossings in a
Continuous Random Process", Journal of the Acoustical Society of America,
39, 1966, pp. 323-335.
10) J. R. Rice,
"Contained Plastic Deformation Near Cracks and Notches Under Longitudinal
Shear", International Journal of Fracture Mechanics, 2, 1966, pp. 426-447.
11) J. R. Rice
and D. C. Drucker, "Energy Changes in Stressed Bodies due to Void and
Crack Growth", International Journal of Fracture Mechanics, 3, 1967, pp.
19-27.
12) J. R. Rice,
"Stresses due to a Sharp Notch in a Work Hardening Elastic-Plastic
Material Loaded by Longitudinal Shear", Journal of Applied Mechanics, 34,
1967, pp. 287-298.
13) J. R. Rice,
"The Mechanics of Crack Tip Deformation and Extension by Fatigue", in
Fatigue Crack Propagation, Special Technical Publication 415, ASTM,
Philadelphia, 1967, pp. 247-311.
14) J. R. Rice,
"Discussion of 'Stresses in an Infinite Strip Containing a Semi-Infinite
Crack' by W.G. Knauss", Journal of Applied Mechanics, 34, 1967, pp.
248-250.
15) J. R. Rice,
"A Path Independent Integral and the Approximate Analysis of Strain
Concentration by Notches and Cracks", Journal of Applied Mechanics, 35,
1968, pp. 379-386.
16)
J. R. Rice and G. F. Rosengren, "Plane Strain Deformation Near a Crack in
a Power Law Hardening Material", Journal of the Mechanics and Physics of
Solids, 16, 1968, pp. 1-12.
17) J. R. Rice,
"The Elastic-Plastic Mechanics of Crack Extension", International
Journal of Fracture Mechanics, 4, 1968, pp. 41-49 (also published in
International Symposium on Fracture Mechanics, Wolters-Noordhoff Publ.,
Groningen, 1968, 41-49).
18)
J. R. Rice, "Mathematical Analysis in the Mechanics of Fracture",
Chapter 3 of Fracture: An Advanced Treatise (Vol. 2, Mathematical Fundamentals)
(ed. H. Liebowitz), Academic Press, N.Y., 1968, pp. 191-311.
19) J. R. Rice
and N. Levy, "Local Heating by Plastic Deformation at a Crack Tip",
in Physics of Strength and Plasticity (ed. A. S. Argon), M.I.T. Press,
Cambridge, Mass., 1969, pp. 277-293.
20)
J. R. Rice and D. M. Tracey, "On the Ductile Enlargement of Voids in
Triaxial Stress Fields", Journal of the Mechanics and Physics of Solids,
17, 1969, pp. 201-217.
21) D. C.
Drucker and J. R. Rice, "Plastic Deformation on Brittle and Ductile
Fracture", Engineering Fracture Mechanics, 1, 1970, pp. 577-602.
22) J. Kestin
and J. R. Rice, "Paradoxes in the Application of Thermodynamics to
Strained Solids", in A Critical Review of Thermodynamics (eds. E.G.
Stuart, B. Gal-Or and A.J. Brainard), Mono Book Corp., Baltimore, 1970, pp.
275-298.
23) H. D.
Hibbitt, P. V. Marcal and J. R. Rice, "A Finite Element Formulation for
Problems of Large Strain and Large Displacement", International Journal of
Solids and Structures, 6, 1970, pp. 1069-1086.
24) J. R. Rice,
"On the Structure of Stress-Strain Relations for Time-Dependent Plastic
Deformation in Metals", Journal of Applied Mechanics, 37, 1970, pp.
728-737.
25) J. R. Rice
and M. A. Johnson, "The Role of Large Crack Tip Geometry Changes in Plane
Strain Fracture", in Inelastic Behavior of Solids (eds. M. F. Kanninen, et
al.), McGraw-Hill, N.Y., 1970, pp. 641-672.
26) N. Levy, P.
V. Marcal, W. J. Ostergren and J. R. Rice, "Small Scale Yielding Near a
Crack in Plane Strain: A Finite Element Analysis", International Journal
of Fracture Mechanics, 7, 1971, pp. 143-156.
27) J. R. Rice
and N. Levy, "The Part-Through Surface Crack in an Elastic Plate",
Journal of Applied Mechanics, 39, 1972, pp. 185-194.
28) N. Levy, P.
V. Marcal and J. R. Rice, "Progress in Three-Dimensional Elastic-Plastic
Stress Analysis for Fracture Mechanics", Nuclear Engineering and Design,
17, 1971, pp. 64-75.
29)
J. R. Rice, "Inelastic Constitutive Relations for Solids: An Internal
Variable Theory and Its Application to Metal Plasticity", Journal of the
Mechanics and Physics of Solids, 19, 1971, pp. 433-455.
30) J. R. Rice,
"Some Remarks on Elastic Crack Tip Stress Fields", International
Journal of Solids and Structures, 8, 1972, pp. 571-758.
31) J. R. Rice
and D. M. Tracey, "Computational Fracture Mechanics", in Numerical
and Computer Methods in Structural Mechanics (eds. S. J. Fenves et al.),
Academic Press, N.Y., 1973, pp. 585-623.
32) B.
Budiansky and J. R. Rice, "Conservation Laws and Energy-Release
Rates", Journal of Applied Mechanics, 40, 1973, pp. 201-203.
33) J. R. Rice
and M. A. Chinnery, "On the Calculation of Changes in the Earth's Inertia
Tensor due to Faulting", Geophysical Journal of the Royal Astronomical
Society, 29, 1972, pp. 79-90.
34) R. J.
Bucci, P. C. Paris, J. D. Landes and J. R. Rice, "J Integral Estimation
Procedures", in Fracture Toughness, Special Technical Publication 514,
Part 2, ASTM, Philadelphia, 1972, pp. 40-69.
35) J. R. Rice,
"The Line Spring Model for Surface Flaws", in The Surface Crack:
Physical Problems and Computational Solutions (ed. J.L. Swedlow), ASME, N.Y.,
1972, pp. 171-185.
36)
R. Hill and J. R. Rice, "Constitutive Analysis of Elastic/Plastic Crystals
at Arbitrary Strain", Journal of the Mechanics and Physics of Solids, 20,
1972, pp. 401-413.
37) J. R. Rice,
"Elastic-Plastic Fracture Mechanics (Remarks for Round Table Discusison on
Fracture at the 13th International Congress of Theoretical and Applied
Mechanics, Moscow, 1972)", Engineering Fracture Mechanics, 5, 1973, pp.
1019-1022.
38) A. C.
Palmer and J. R. Rice, "The Growth of Slip Surfaces in the Progressive
Failure of Overconsolidated Clay", Proceedings of the Royal Society of
London, A 332, 1973, pp. 527-548.
39)
J. R. Rice, "Plane Strain Slip Line Theory for Anisotropic Rigic/Plastic
Materials", Journal of the Mechanics and Physics of Solids, 21, 1973, pp.
63-74.
40) J. R. Rice,
P. C. Paris and J. G. Merkle, "Some Further Results of J-Integral Analysis
and Estimates", in Progress in Flaw Growth and Fracture Toughness Testing,
Special Tech. Publication 536, ASTM, Philadelphia, 1973, pp. 231-245.
41) R. Hill and
J. R. Rice, "Elastic Potentials and the Structure of Inelastic
Constitutive Laws", SIAM Journal of Applied Mathematics, 25, 1973, pp.
448-461.
42) J. R. Rice,
"Continuum Plasticity in Relation to Microscale Deformation
Mechanisms", in Metallurgical Effects at High Strain Rate (eds. R.W. Rohde
et al.), Plenum Press, 1973, pp. 93-106.
43) J. R. Rice,
"Elastic-Plastic Models for Stable Crack Growth", in Mechanics and
Mechanisms of Crack Growth (ed. M.J. May), British Steel Corporation Physical
Metallurgy Centre Publication, April 1973 (issued 1975), pp. 14-39.
44) T-j. Chuang
and J. R. Rice, "The Shape of Intergranular Creep Cracks Growing by
Surface Diffusion", Acta Metallurgica, 21, 1973, pp. 1625-1628.
45)
R. O. Ritchie, J. F. Knott and J. R. Rice, "On the Relationship Between
Critical Tensile Stress and Fracture Toughness in Mild Steel", Journal of
the Mechanics and Physics of Solids, 21, 1973, pp. 395-410.
46) L. B.
Freund and J. R. Rice, "On the Determination of Elastodynamic Crack Tip
Stress Fields, International Journal of Solids and Structures, 10, 1974, pp.
411-417.
47) J. R.
Rice, "Limitations to the Small Scale Yielding Approximation for Crack Tip
Plasticity", Journal of the Mechanics and Physics of Solids, 22, 1974, pp.
17-26.
48) J. R. Rice
and R. M. Thomson, "Ductile vs. Brittle Behavior of Crystals",
Philosophical Magazine, 29, 1974, 73-97.
49) J. R. Rice,
"The Initiation and Growth of Shear Bands", in Plasticity and Soil
Mechanics (edited by A. C. Palmer), Cambridge University Engineering
Department, Cambridge, 1973, pp. 263-274.
50) J. C.
Nagtegaal, D. M. Parks and J. R. Rice, "On Numerically Accurate Finite
Element Solutions in the Fully Plastic Range", Computer Methods in Applied
Mechanics and Engineering, 4, 1974, pp. 153-177.
51) J. R. Rice,
"Mechanics Aspects of Stress Corrosion Cracking and Hydrogen
Embrittlement", in Stress Corrosion Cracking and Hydrogen Embrittlement of
Iron Base Alloys (eds. R. W. Staehle et al.), National Association of Corrosion
Engineers, Houston, 1977, pp. 11-15.
52) J. R. Rice,
"Continuum Mechanics and Thermodynamics of Plasticity in Relation to
Microscale Deformation Mechanisms", Chapter 2 of Constitutive Equations in
Plasticity (ed. A. S. Argon), M.I.T. Press, 1975, pp. 23-79.
53) R. M.
McMeeking and J. R. Rice, "Finite-Element Formulations for Problems of
Large Elastic-Plastic Deformation", International Journal of Solids and
Structures, 11, 1975, pp. 601-616.
54) J. R. Rice,
"On the Stability of Dilatant Hardening for Saturated Rock Masses",
Journal of Geophysical Research, 80, 1975, pp. 1531-1536.
55) J. R. Rice,
"Discussion of 'The Path Independence of the J-Contour Integral' by G. G.
Chell and P. T. Heald", International Journal of Fracture, 11, 1975, pp.
352-353.
56) J. R. Rice,
"Some Mechanics Research Topics Related to the Hydrogen Embrittlement of
Metals" (discussion appended to paper by J. P. Hirth and H. H. Johnson);
Corrosion, 32, 1976, pp. 22-26.
57)
J. W. Rudnicki and J. R. Rice, "Conditions for the Localization of
Deformation in Pressure-Sensitive Dilatant Materials", Journal of the
Mechanics and Physics of Solids, 23, 1975, pp. 371-394.
58)
S. Storen and J. R. Rice, "Localized Necking in Thin Sheets", Journal
of the Mechanics and Physics of Solids, 23, 1975, pp. 421-441.
59) J. R. Rice
and M. P. Cleary, "Some Basic Stress-Diffusion Solutions for
Fluid-Saturated Elastic Porous Media with Compressible Constituents",
Reviews of Geophysics and Space Physics, 14, 1976, pp. 227-241.
60) J. R. Rice,
"Hydrogen and Interfacial Cohesion", in Effect of Hydrogen on
Behavior of Materials (eds. A.W. Thompson and I.M. Bernstein), Metallurgical
Society of AIME, 1976, pp. 455-466.
61) L.B.
Freund, D.M. Parks and J. R. Rice, "Running Ductile Fracture in a
Pressurized Line Pipe", in Mechanics of Crack Growth, Special Technical
Publication 590, ASTM, Philadephia, 1976, pp. 243-262.
62)
J. R. Rice, "The Localization of Plastic Deformation", in Theoretical
and Applied Mechanics (Proceedings of the 14th International Congress on
Theoretical and Applied Mechanics, Delft, 1976, ed. W.T. Koiter), Vol. 1,
North-Holland Publishing Co., 1976, 207-220.
63) J. R. Rice
and D. A. Simons, "The Stabilization of Spreading Shear Faults by Coupled
Deformation-Diffusion Effects in Fluid-Infiltrated Porous Materials",
Journal of Geophysical Research, 81, 1976, pp. 5322-5334.
64) A. P.
Kfouri and J. R. Rice, "Elastic/Plastic Separation Energy Rate for Crack
Advance in Finite Growth Steps", in Fracture 1977 (eds. D.M.R. Taplin et
al.), Vol. 1, Solid Mechanics Division Publication, University of Waterloo, Canada,
1977, pp. 43-59.
65) J. R. Rice,
"Elastic-Plastic Fracture Mechanics", in The Mechanics of Fracture
(ed. F. Erdogan), Applied Mechanics Division (AMD) Volume 19, American Society
of Mechanical Engineers, New York, 1976, pp. 23-53.
66)
R. J. Asaro and J. R. Rice, "Strain Localization in Ductile Single
Crystals", Journal of the Mechanics and Physics of Solids, 25, 1977, pp.
309-338.
67) V. N.
Nikolaevskii and J. R. Rice, "Current Topics in Non-elastic Deformation of
Geological Materials", in High-Pressure Science and Technology: Sixth
AIRAPT Conference, Volume 2: Applications and Mechanical Properties (ed. K.D.
Timmerhaus and M.S. Barber), Plenum Press, New York, 1979, pp. 455-464.
68) J. R. Rice,
J. W. Rudnicki and D. A. Simons, "Deformation of Spherical Cavities and
Inclusions in Fluid-Infiltrated Elastic Materials", International Journal
of Solids and Structures, 14, 1978, pp. 289-303.
69) J. R. Rice,
"Theory of Precursory Processes in the Inception of Earthquake
Rupture", in Proceedings of the Symposium on Physics of Earthquake Sources
(at General Assembly of International Association of Seismology and Physics of
the Earth's Interior, Durham, England, August 1977), Gerlands Beitrage zur
Geophysik, 88, 1979, pp. 91-127.
70) A.
Needleman and J. R. Rice, "Limits to Ductility Set by Plastic Flow
Localization", in Mechanics of Sheet Metal Forming (Proceedings of General
Motors Research Laboratories Symposium, October 1977, ed. D.P. Koistinen and
N.-M. Wang), Plenum Press, 1978, pp. 237-267.
71) J. R. Rice,
"Some Computational Problems in Elastic-Plastic Crack Mechanics", in
Numerical Methods in Fracture Mechanics (Proceedings of the First International
Conference on Numerical Methods in Fracture Mechanics, Swansea, Wales, 1978;
eds. A. R. Luxmoore and D. R. J. Owen), Department of Civil Engineering,
University College of Swansea, Wales, 1978, pp. 434-449.
72) J. R. Rice,
"Pore Pressure Effects in Inelastic Constitutive Formulations for Fissured
Rock Masses", in Advances in Civil Engineering Through Engineering
Mechanics (Proceedings of 2nd ASCE Engineering Mechanics Division Specialty
Conference, Raleigh, N.C., 1977), American Society of Civil Engineers, New
York, 1977, pp. 295-297.
73) J. R. Rice,
"Fracture Mechanics Model for Slip Surface Propagation in Soil and Rock
Masses", in Advances in Civil Engineering Through Engineering Mechanics
(Proceedings of 2nd ASCE Engineering Mechanics Division Specialty Conference,
Raleigh, N.C., 1977), American Society of Civil Engineers, New York, 1977, pp.
373-376.
74) J.
R. Rice, "Thermodynamics of the Quasi-Static Growth of Griffith
Cracks", Journal of the Mechanics and Physics of Solids, 26, 1978, pp.
61-78.
75)
J. R. Rice and E. P. Sorensen, "Continuing Crack Tip Deformation and
Fracture for Plane-Strain Crack Growth in Elastic-Plastic Solids", Journal
of the Mechanics and Physics of Solids, 26, 1978, pp. 163-186.
76) B.
Budiansky and J. R. Rice, "On the Estimation of a Crack Fracture Parameter
by Long-Wavelength Scattering", Journal of Applied Mechanics, 45, 1978,
pp. 453-454.
77) J. R. Rice
and J. W. Rudnicki, "Earthquake Precursory Effects due to Pore Fluid
Stabilization of a Weakening Fault Zone", Journal of Geophysical Research,
84, 1979, pp. 2177-2193.
78) J. B. Walsh
and J. R. Rice, "Local Changes in Gravity Resulting from
Deformation", Journal of Geophysical Research, 84, 1979, pp. 165-170.
79) T-j.
Chuang, K. I. Kagawa, J. R. Rice and L. B. Sills, "Non-equilibrium Models
for Diffusive Cavitation of Grain Interfaces", Acta Metallurgica, Overview
Paper No. 2, 27, 1979, pp. 265-284.
80) J. R. Rice,
R. M. McMeeking, D. M. Parks and E. P. Sorensen, "Recent Finite Element
Studies in Plasticity and Fracture Mechanics", in Proceedings of the
FENOMECH '78 Conference (Stuttgart, edited by K.S. Pister et al.),
North-Holland Publ. Co., Vol. 2, 1979, pp. 411-442; also, Computer Methods in
Applied Mechanics and Engineering, 17/18, 1979, pp. 411-442.
81) W. Kohn and
J. R. Rice, "Scattering of Long Wavelength Elastic Waves form Localized
Defects in Solids", Journal of Applied Physics, 50, 1979, pp. 3346-3353.
82) J. R. Rice,
"The Mechanics of Quasi-static Crack Growth", in Proceedings of the
8th U.S. National Congress of Applied Mechanics (at U.C.L.A., June 1978; ed. R.
E. Kelly), Western Periodicals Co., North Hollywood, California, 1979, pp.
191-216.
83)
B. Cotterell and J. R. Rice, "Slightly Curved or Kinked Cracks",
International Journal of Fracture, 16, 1980, pp. 155-169.
84) B.
Budiansky and J. R. Rice, "An Integral Equation for Dynamic Elastic
Response of an Isolated 3-D Crack", Wave Motion, 1, 1979, pp. 187-192.
85) A. G.
Evans, J. R. Rice and J. P. Hirth, "The Suppression of Cavity Formation in
Ceramics: Prospects for Superplasticity", Journal of the American Ceramic
Society, 63, 1980, pp. 368-375.
86) J. R. Rice,
"Plastic Creep Flow Processes in Fracture at Elevated Temperature",
in Time-Dependent Fracture of Materials at Elevated Temperature (ed. S.M. Wolf),
U.S. Department of Energy Report CONF 790236 UC-25, June 1979, pp. 130-145.
87) B.
Budiansky, D. C. Drucker, G. S. Kino and J. R. Rice, "The Pressure
Sensitivity of a Clad Optical Fiber", Applied Optics, 18, 1979, pp.
4085-4088.
88) J.
R. Rice, "The Mechanics of Earthquake Rupture", in Physics of the
Earth's Interior (Proc. International School of Physics 'Enrico Fermi', Course
78, 1979; ed. A. M. Dziewonski and E. Boschi), Italian Physical Society and
North-Holland Publ. Co., 1980, pp. 555-649.
89) J. R. Rice,
"Discussion on 'Outstanding Problems in Geodynamics: Mechanisms of
Faulting'", in Physics of the Earth's Interior (Proc. International School
of Physics 'Enrico Fermi', Course 78, 1979; ed. A. M. Dziewonski and E.
Boschi), Italian Physical Society and North-Holland Publ. Co., 1980, pp.
713-716.
90) J. R. Rice
and J. W. Rudnicki, "A Note on Some Features of the Theory of Localization
of Deformation", International Journal of Solids and Structures, 16, 1980,
pp. 597-605.
91) H. Riedel
and J. R. Rice, "Tensile Cracks in Creeping Solids", in Fracture
Mechanics: Twelfth Conference (ed. P.C. Paris), Special Technical Publication
700, ASTM, Philadelphia, 1980, pp. 112-130.
92) J. R. Rice,
W. J. Drugan and T. L. Sham, "Elastic-Plastic Analysis of Growing
Cracks", in Fracture Mechanics: Twelfth Conference (ed. P. C. Paris),
Special Technical Publication 700, ASTM, Philadelphia, 1980, pp. 189-221.
93) A.
Needleman and J. R. Rice, "Plastic Creep Flow Effects in the Diffusive
Cavitation of Grain Boundaries", Acta Metallurgica, Overview Paper No. 9,
28, 1980, pp. 1315-1332.
94) J. P. Hirth
and J. R. Rice, "On the Thermodynamics of Adsorption at Interfaces as it
Influences Decohesion", Metallurgical Transactions, 11A, 1980, pp.
1501-1511.
95) L. Hermann
and J. R. Rice, "Comparison of Theory and Experiment for Elastic-Plastic
Plane-Strain Crack Growth", Metal Science, 14, 1980, pp. 285-291.
96) J. R. Rice
and T-j. Chuang, "Energy Variations in Diffusive Cavity Growth",
Journal of the American Ceramic Society, 64, 1981, pp. 46-53.
97) J. R. Rice,
"Elastic-Plastic Crack Growth", in Mechanics of Solids: The Rodney
Hill 60th Anniversary Volume (ed. H.G. Hopkins and M.J. Sewell), Pergamon
Press, Oxford and New York, 1982, pp. 539-562.
98) J. R. Rice,
"Creep Cavitation of Grain Interfaces", in Three-Dimensional
Constitutive Relations and Ductile Fracture (ed. S. Nemat-Nasser),
North-Holland Publ. Co., 1981, pp. 173-184.
99) J. R. Rice,
"Pore-Fluid Processes in the Mechanics of Earthquake Rupture", in
Solid Earth Geophysics and Geotechnology (ed. S. Nemat-Nasser), American
Society of Mechanical Engineers, Appl. Mech. Div. Volume 42, New York, 1980,
pp. 81-89.
100) J. R.
Rice, "Constraints on the Diffusive Cavitation of Isolated Grain Boundary
Facets in Creeping Polycrystals", Acta Metallurgica, 29, 1981, pp.
675-681.
101) F. K.
Lehner, V. C. Li and J. R. Rice, "Stress Diffusion along Rupturing Plate
Boundaries", Journal of Geophysical Research, 86, 1981, pp. 6155-6169.
102) J. R.
Rice, "Elastic Wave Emission from Damage Processes", Journal of
Nondestructive Evaluation, 1, 1980, pp. 215-224.
103)
W. J. Drugan, J. R. Rice and T.-L. Sham, "Asymptotic Analysis of Growing
Plane Strain Tensile Cracks in Elastic-Ideally Plastic Solids", Journal of
the Mechanics and Physics of Solids, 30, 1982, pp. 447-473; erratum, 31, 1983,
p. 191.
104) W. J.
Drugan and J. R. Rice, "Restrictions on Quasi-Statically Moving Surfaces
of Strong Discontinuity in Elastic-Plastic Solids", in Mechanics of
Material Behavior (the D.C. Drucker anniversary volume, ed. G.J. Dvorak and
R.T. Shield), Elsevier, 1984, pp. 59-73.
105) J. R. Rice
and A. L. Ruina, "Stability of Steady Frictional Slipping", Journal
of Applied Mechanics, 50, 1983, pp. 343-349.
106) J. Pan and
J. R. Rice, "Rate Sensitivity of Plastic Flow and Implications for Yield
Surface Vertices", International Journal of Solids and Structures, 19,
1983, pp. 973-987.
107) V. C. Li
and J. R. Rice, "Pre-seismic Rupture Progression and Great Earthquake
Instabilities at Plate Boundaries", Journal of Geophysical Research, 88,
1983, pp. 4231-4246.
108) J. R.
Rice, "Shear Instability in Relation to the Constitutive Description of
Fault Slip", in Rockbursts and Seismicity in Mines (ed. N.C. Gay and E.H.
Wainwright), Symp. Ser. No. 6, S. African Inst. Mining and Metallurgy,
Johannesburg, 1984, pp. 57-62.
109) R. Dmowska
and J. R. Rice, "Fracture Theory and Its Seismological Applications",
in Continuum Theories in Solid Earth Physics (Vol. 3 of series "Physics
and Evolution of the Earth's Interior"; ed. R. Teisseyre), Elsevier and
Polish Scientific Publishers, 1986, pp. 187-255.
110) V. C. Li
and J. R. Rice, "Precursory Surface Deformation in Great Plate Boundary
Earthquake Sequences", Bulletin of the Seismological Society of America,
73, 1983, pp. 1415-1434.
111)
J.-c. Gu, J. R. Rice, A. L. Ruina and S.T. Tse, "Slip Motion and Stability
of a Single Degree of Freedom Elastic System with Rate and State Dependent
Friction", Journal of the Mechanics and Physics of Solids, 32, 1984, pp.
167-196.
112) J. R.
Rice, "Comments on 'On the Stability of Shear Cracks and the Calculation
of Compressive Strength' by J.K. Dienes", Journal of Geophysical Research,
89, 1984, pp. 2505-2507.
113) J. R.
Rice, "Shear Localization, Faulting and Frictional Slip: Discusser's
Report", in Mechanics of Geomaterials (Proc. IUTAM W. Prager Symp., Sept.
1983, ed. Z.P. Bazant), J. Wiley and Sons Ltd., 1985, Chp. 11, pp. 211-216.
114) J. R. Rice
and J.-c. Gu, "Earthquake Aftereffects and Triggered Seismic
Phenomena", Pure and Applied Geophysics, 121, 1983, pp. 187-219.
115) J. R.
Rice, "Constitutive Relations for Fault Slip and Earthquake
Instabilities", Pure and Applied Geophysics, 121, 1983, pp. 443-475.
116) J. R.
Rice, "On the Theory of Perfectly Plastic Anti-Plane Straining",
Mechanics of Materials, 3, 1984, pp. 55-80.
117) J. R.
Rice, "Conserved Integrals and Energetic Forces", in Fundamentals of
Deformation and Fracture (Eshelby Memorial Symposium), ed. B.A. Bilby, K.J.
Miller and J.R. Willis, Cambridge Univ. Press, 1985, pp. 33-56.
118) P. M.
Anderson and J. R. Rice, "Constrained Creep Cavitation of Grain Boundary
Facets", Acta Metallurgica, 33, 1985, pp. 409-422.
119)
J. R. Rice, "First Order Variation in Elastic Fields due to Variation in
Location of a Planar Crack Front", Journal of Applied Mechanics, 52, 1985,
pp. 571-579.
120) S. T. Tse,
R. Dmowska and J. R. Rice, "Stressing of Locked Patches along a Creeping
Fault", Bulletin of the Seismological Society of America, 75, 1985, pp.
709-736.
121)
J. R. Rice and R. Nikolic, "Anti-plane Shear Cracks in Ideally Plastic
Crystals", Journal of the Mechanics and Physics of Solids, 33, 1985, pp.
595-622.
122) J. R.
Rice, "Three Dimensional Elastic Crack Tip Interactions with
Transformation Strains and Dislocations", International Journal of Solids
and Structures, 21, 1985, pp. 781-791.
123) J. R. Rice
and S. T. Tse, "Dynamic Motion of a Single Degree of Freedom System
following a Rate and State Dependent Friction Law", Journal of Geophysical
Research, 91, 1986, pp. 521-530.
124) J. R. Rice
(Editor), Solid Mechanics Research Trends and Opportunities (Report of the
Committee on Solid Mechanics Research Directions of the Applied Mechanics
Division, American Society of Mechanical Engineers), Applied Mechanics Reviews,
38, 1985, pp. 1247-1308; published simultaneously as AMD-Vol. 70, ASME Book No.
I00198.
125) J. R.
Rice, "Fracture Mechanics", in Solid Mechanics Research Trends and
Opportunities, ed. J. R. Rice, Applied Mechanics Reviews, 38, 1985, pp. 1271-1275;
published simultaneously in AMD-Vol. 70, ASME Book No. I00198.
126) H. Gao and
J. R. Rice, "Shear Stress Intensity Factors for a Planar Crack with
Slightly Curved Front", Journal of Applied Mechanics, 53, 1986, pp.
774-778.
127) S. T. Tse
and J. R. Rice, "Crustal Earthquake Instability in Relation to the Depth
Variation of Frictional Slip Properties", Journal of Geophysical Research,
91, 1986, pp. 9452-9472.
128) P. M.
Anderson and J. R. Rice, "Dislocation Emission from Cracks in Crystals or
Along Crystal Interfaces", Scripta Metallurgica, 20, 1986, pp. 1467-1472.
129) J.-S.
Wang, P.M. Anderson and J. R. Rice, "Micromechanics of the Embrittlement
of Crystal Interfaces", in Mechanical Behavior of Materials - V
(Proceedings of the 5th International Conference, Beijing, 1987; ed. M.G. Yan,
S.H. Zhang and Z.M. Zheng), Pergamon Press, 1987, pp. 191-198.
130) J. R.
Rice, "Mechanics of Brittle Cracking of Crystal Lattices and
Interfaces", in Chemistry and Physics of Fracture (proceedings of a 1986
NATO Advanced Research Workshop; edited by R.M. Latanision and R.H. Jones),
Martinus Nijhoff Publishers, Dordrecht, 1987, pp. 22-43.
131)
P. M. Anderson and J. R. Rice, "The Stress Field and Energy of a
Three-Dimensional Dislocation Loop at a Crack Tip", Journal of the
Mechanics and Physics of Solids, 35, l987, pp. 743-769.
132) H. Gao and
J. R. Rice, "Somewhat Circular Tensile Cracks", International Journal
of Fracture, 33, 1987, 155-174.
133) J. R.
Rice, "Two General Integrals of Singular Crack Tip Deformation
Fields", Journal of Elasticity, 20, 1988, pp. 131-142.
134) H. Gao and
J. R. Rice, "Nearly Circular Connections of Elastic Half Spaces",
Journal of Applied Mechanics, 54, 1987, pp. 627-634.
135) R. Hill
and J. R. Rice, "Discussion of 'A Rate-Independent Constitutive Theory for
Finite Inelastic Deformation' by M.M. Carroll", Journal of Applied
Mechanics, 54, 1987, pp. 745-747.
136) V. C. Li
and J. R. Rice, "Crustal Deformation in Great California Earthquake
Cycles", Journal of Geophysical Research, 92, l987, pp. 11,533-11,55l.
137)
J. R. Rice and M. Saeedvafa, "Crack Tip Singular Fields in Ductile
Crystals with Taylor Power-Law Hardening, I: Anti-Plane Shear", Journal of
the Mechanics and Physics of Solids, 36, 1988, pp. 189-214.
138) J. R.
Rice, "Tensile Crack Tip Fields in Elastic-Ideally Plastic Crystals",
Mechanics of Materials, 6, 1987, pp. 317-335.
139)
J. R. Rice, "Elastic Fracture Mechanics Concepts for Interfacial
Cracks", Journal of Applied Mechanics, 55, l988, pp. 98-103.
140) J. W.
Hutchinson, M. E. Mear and J. R. Rice, "Crack Paralleling an Interface
Between Dissimilar Materials", Journal of Applied Mechanics, 54, l987, pp.
828-832.
141) R.
Dmowska, J. R. Rice, L.C. Lovison and D. Josell, "Stress Transfer and
Seismic Phenomena in Coupled Subduction Zones During the Earthquake
Cycle", Journal of Geophysical Research, 93, 1988, pp. 7869-7884.
142) J. R.
Rice, "Weight Function Theory for Three-Dimensional Elastic Crack
Analysis", in Fracture Mechanics: Perspectives and Directions (Twentieth
Symposium), Special Technical Publication 1020, eds. R. P. Wei and R. P.
Gangloff, ASTM, Philadelphia, 1989, pp. 29-57.
143) J. R.
Rice, "Crack Fronts Trapped by Arrays of Obstacles: Solutions Based on
Linear Perturbation Theory", in Analytical, Numerical and Experimental
Aspects of Three Dimensional Fracture Processes (eds. A. J. Rosakis, K.
Ravi-Chandar and Y. Rajapakse), ASME Applied Mechanics Division Volume 91,
American Society of Mechanical Engineers, New York, 1988, pp. 175-184.
144) J. Yu and
J. R. Rice, "Dislocation Pinning Effect of Grain Boundary Segregated
Solutes at a Crack Tip", in Interfacial Structure, Properties and Design
(eds. M.H. Yoo, W.A.T. Clark and C.L. Briant), Materials Research Society Proc.
Vol. 122, 1988, pp. 361-366.
145) H.
Gao and J. R. Rice, "Application of 3D Weight Functions - II. The Stress
Field and Energy of a Shear Dislocation Loop at a Crack Tip", Journal of
the Mechanics and Physics of Solids, 37, 1989, pp. 155-174.
146) R. Nikolic
and J. R. Rice, "Dynamic Growth of Anti-Plane Shear Cracks in Ideally
Plastic Crystals", Mechanics of Materials, 7, 1988, pp. 163-173.
147) J. R.
Rice, D. E. Hawk and R. J. Asaro, "Crack Tip Fields in Ductile Crystals",
International Journal of Fracture, 42, 1990, pp. 301-321.
148) J. R. Rice
and J.-S. Wang, "Embrittlement of Interfaces by Solute Segregation",
Materials Science and Engineering, A107, 1989, pp. 23-40.
149) P. M.
Anderson, J.-S. Wang and J. R. Rice, "Thermodynamic and Mechanical Models
of Interfacial Embrittlement", in Innovations in Ultrahigh-Strength Steel
Technology (eds. G. B. Olson, M. Azrin and E. S. Wright), Sagamore Army
Materials Research Conference Proceedings, Volume 34, 1990, pp. 619-649.
150)
M. Saeedvafa and J. R. Rice, "Crack Tip Singular Fields in Ductile
Crystals with Taylor Power-Law Hardening, II: Plane Strain", Journal of
the Mechanics and Physics of Solids, 37, 1989, pp. 673-691.
151) J. R.
Rice, "Summary of Studies on Crack Tip Fields in Ductile Crystals",
in Yielding, Damage, and Failure of Anisotropic Solids (ed. J. P. Boehler),
Mechanical Engineering Publications (London), 1990, pp. 49-52.
152) H.
Gao and J. R. Rice, "A First Order Perturbation Analysis of Crack Trapping
by Arrays of Obstacles", Journal of Applied Mechanics, 56, 1989, pp.
828-836.
153) J. R.
Rice, Z. Suo and J.-S. Wang, "Mechanics and Thermodynamics of Brittle
Interfacial Failure in Bimaterial Systems", in Metal-Ceramic Interfaces
(eds. M. Rhle, A. G. Evans, M. F. Ashby and J. P. Hirth), Acta-Scripta
Metallurgica Proceedings Series, Volume 4, Pergamon Press, 1990, pp. 269-294.
154) Y. Sun, J.
R. Rice and L. Truskinovsky, "Dislocation Nucleation Versus Cleavage in
Ni3Al and Ni", in High-Temperature Ordered Intermetallic Alloys (eds. L.
A. Johnson, D. T. Pope and J. O. Stiegler), Materials Research Society Proc.
Vol. 213, 1991, pp. 243-248.
155) J. R.
Rice, "Fault Stress States, Pore Pressure Distributions, and the Weakness
of the San Andreas Fault", in Fault Mechanics and Transport Properties in
Rocks (eds. B. Evans and T.-F. Wong), Academic Press, 1992, pp. 475-503
156) G. E.
Beltz and J. R. Rice, "Dislocation Nucleation Versus Cleavage Decohesion
at Crack Tips", in Modeling the Deformation of Crystalline Solids (eds. T.
C. Lowe, A. D. Rollett, P. S. Follansbee and G. S. Daehn), The Minerals, Metals
and Materials Society (TMS), Warrendale, Penna., 1991, pp. 457-480.
157)
J. R. Rice, "Dislocation Nucleation from a Crack Tip: An Analysis Based on
the Peierls Concept", Journal of the Mechanics and Physics of Solids, 40,
1992, pp. 239-271.
158) H. Gao, J.
R. Rice and J. Lee, "Penetration of a Quasistatically Slipping Crack into
a Seismogenic Zone of Heterogeneous Fracture Resistance", Journal of
Geophysical Research, 96, 1991, 21535-21548.
159) G. E.
Beltz and J. R. Rice, "Dislocation Nucleation at Metal/Ceramic
Interfaces", Acta Metallurgica et Materiala, 40, Supplement, 1992, pp.
s321-s331.
160) J. R.
Rice, G. E. Beltz and Y. Sun, "Peierls Framework for Analysis of Dislocation
Nucleation from a Crack Tip", in Topics in Fracture and Fatigue (ed. A. S.
Argon), Springer Verlag, 1992, Chapter 1, pp. 1-58.
161) M.
Saeedvafa and J. R. Rice, "Crack Tip Fields in a Material with Three
Independent Slip Systems: NiAl Single Crystal", Modelling and Simulation
in Materials Science and Engineering, 1, 1992, pp. 53-71.
162) Y.
Ben-Zion, J. R. Rice and R. Dmowska, "Interaction of the San Andreas Fault
Creeping Segment with Adjacent Great Rupture Zones, and Earthquake Recurrence
at Parkfield, Journal of Geophysical Research, 98, 1993, pp. 2135-2144.
163) J. R.
Rice, "Mechanics of Solids", section of the article on
"Mechanics", in Encyclopaedia Britannica (1993 printing of the 15th
edition), volume 23, pp. 734-747 and 773, 1993
164) J. R.
Rice, "Spatio-temporal Complexity of Slip on a Fault", Journal of
Geophysical Research, 98, 1993, pp. 9885-9907.
165) Y. Sun, G.
E. Beltz and J. R. Rice, "Estimates from Atomic Models of Tension-Shear
Coupling in Dislocation Nucleation from a Crack Tip", Materials Science
and Engineering A, 170, 1993, pp. 67-85.
166) M. F.
Linker and J. R. Rice, "Models of Postseismic Deformation and Stress
Transfer Associated with the Loma Prieta Earthquake", in U. S. Geological
Survey Professional Paper 1550-D: The Loma Prieta, California, Earthquake of
October 17, 1989 - Aftershocks and Postseismic Effects, 1997, pp. D253-D275.
167) Y.
Ben-Zion and J. R. Rice, "Earthquake Failure Sequences Along a Cellular
Fault Zone in a 3D Elastic Solid Containing Asperity and Non-Asperity
Regions", Journal of Geophysical Research, 98, 1993, pp. 14,109-14,131.
168)
J. R. Rice and G. E. Beltz, "The Activation Energy for Dislocation
Nucleation at a Crack", Journal of the Mechanics and Physics of Solids,
42, 1994, pp. 333-360.
169)
J. R. Rice, Y. Ben-Zion and K.-S. Kim, "Three-Dimensional Perturbation
Solution for a Dynamic Planar Crack Moving Unsteadily in a Model Elastic
Solid", Journal of the Mechanics and Physics of Solids, 42, 1994, pp.
813-843.
170)
G. Perrin and J. R. Rice, "Disordering of a Dynamic Planar Crack Front in
a Model Elastic Medium of Randomly Variable Toughness", Journal of the
Mechanics and Physics of Solids, 42, 1994, pp. 1047-1064.
171) Y.
Ben-Zion and J. R. Rice, "Quasi-Static Simulations of Earthquakes and Slip
Complexity along a 2D Fault in a 3D Elastic Solid", in The Mechanical
Involvement of Fluids in Faulting, Proceedings of June 1993 National Earthquake
Hazards Reduction Program Workshop LXIII, USGS Open-File Report 94-228, Menlo
Park, CA, 1994, pp. 406-435.
172) Y.
Ben-Zion and J. R. Rice, "Slip Patterns and Earthquake Populations along
Different Classes of Faults in Elastic Solids", Journal of Geophysical
Research, 100, 1995, pp. 12959-12983.
173) G.
Perrin, J. R. Rice and G. Zheng, "Self-healing Slip Pulse on a Frictional
Surface", Journal of the Mechanics and Physics of Solids, 43, 1995, pp.
1461-1495.
174) P.
H. Geubelle and J. R. Rice, "A Spectral Method for Three-Dimensional
Elastodynamic Fracture Problems", Journal of the Mechanics and Physics of
Solids, 43, 1995, pp. 1791-1824.
175) J. R.
Rice, "Text of Timoshenko Medal Speech", in Applied Mechanics
Newsletter (ed. B. Moran), American Society of Mechanical Engineers, Spring
1995, pp. 2-3.
176) P.
Segall and J. R. Rice, "Dilatancy, Compaction, and Slip Instability of a
Fluid Infiltrated Fault", Journal of Geophysical Research, 100, 1995, pp.
22155-22171.
177) J.
R. Rice and Y. Ben-Zion, "Slip Complexity in Earthquake Fault
Models", Proceedings of the National Academy of Sciences USA, 93, 1996,
pp. 3811-3818.
178) R.
Dmowska, G. Zheng and J. R. Rice, "Seismicity and Deformation at
Convergent Margins due to Heterogeneous Coupling", Journal of Geophysical
Research, 101, 1996, pp. 3015-3029.
179) M. A. J. Taylor, G. Zheng, J. R. Rice, W. D.
Stuart and R. Dmowska, "Cyclic Stressing and Seismicity at Strongly
Coupled Subduction Zones", Journal of Geophysical Research, 101, 1996, pp.
8363-8381.
180) G. Zheng,
R. Dmowska and J. R. Rice, "Modeling Earthquake Cycles in the Shumagins
Subduction Segment, Alaska, with Seismic and Geodetic Constraints",
Journal of Geophysical Research, 101, 1996, pp. 8383-8392.
181)
G. E. Beltz, J. R. Rice, C. F. Shih and L. Xia, "A Self-Consistent Model
for Cleavage in the Presence of Plastic Flow", Acta Materiala, 44, 1996,
pp. 3943-3954.
182) A.
Cochard and J. R. Rice, "A Spectral Method for Numerical Elastodynamic
Fracture Analysis without Spatial Replication of the Rupture Event", Journal
of the Mechanics and Physics of Solids, 45, 1997, pp. 1393-1418.
183) Y.
Ben-Zion and J. R. Rice, "Dynamic Simulations of Slip on a Smooth Fault in
an Elastic Solid", Journal of Geophysical Research, 102, 1997, pp.
17771-17784.
184) J.
W. Morrissey and J. R. Rice, "Crack Front Waves", Journal of the
Mechanics and Physics of Solids, 46, 1998, pp. 467-487.
185) M.
A. J. Taylor, R. Dmowska and J. R. Rice, "Upper-plate Stressing and
Seismicity in the Subduction Earthquake Cycle", Journal of Geophysical
Research,
103, 1998, pp. 24523-24542.
186) J. R.
Rice, "Foundations of Solid Mechanics", in Mechanics and
Materials: Fundamentals and Linkages (eds. M. A. Meyers, R. W. Armstrong, and
H. Kirchner), Chapter 3, Wiley, 1999, pp. 33-69.
187) G.
Zheng and J. R. Rice, "Conditions under which Velocity-weakening Friction
allows a Self-healing versus a Cracklike Mode of Rupture", Bulletin of
the Seismological Society of America, 88, 1998, pp. 1466-1483.
188) K.
Ranjith and J. R. Rice, "Stability of Quasi-static Slip in a Single Degree
of Freedom Elastic System with Rate and State Dependent Friction", Journal
of the Mechanics and Physics of Solids, 47, 1999, pp. 1207-1218.
189) J. W.
Morrissey and J. R. Rice, "Perturbative simulations of crack front
waves", Journal of the Mechanics and Physics of Solids, 48, 2000, 1229-1251.
190) K.
Ranjith and J. R. Rice, "Slip dynamics at an interface between dissimilar
materials", Journal of the Mechanics and Physics of Solids, 49, 2001, 341-361.
191) B. E.
Shaw and J. R. Rice, "Existence of continuum complexity in the
elastodynamics of repeated fault ruptures", Journal of Geophysical
Research,
105, 2000, 23,791-23,810.
192) N. Lapusta,
J. R. Rice, Y. Ben-Zion and G. Zheng, "Elastodynamic analysis for slow
tectonic loading with spontaneous rupture episodes on faults with rate- and
state-dependent friction", Journal of Geophysical Research, 105, 2000,
23,765-23,789.
193) A.
Cochard and J. R. Rice, "Fault rupture between dissimilar materials:
Ill-posedness, regularization and slip-pulse response", Journal of
Geophysical Research,
105, 2000, 25,891-25,907.
194) H.
Perfettini, J. Schmittbuhl, J. R. Rice and M. Cocco, "Frictional response
induced by time-dependent fluctuations of the normal loading", Journal
of Geophysical Research, 106, 13,455-13,472, 2001.
195) C. G.
Sammis and J. R. Rice, "Repeating earthquakes as low-stress-drop events at
a border between locked and creeping fault patches", Bulletin of the
Seismological Society of America, 91, 532-537, 2001.
196) J. R.
Rice, "New perspectives in crack and fault dynamics", in Mechanics
for a New Millennium
(Proceedings of the 20th International Congress of Theoretical and Applied
Mechanics, 27 Aug - 2 Sept 2000, Chicago), eds. H. Aref and J. W. Phillips,
Kluwer Academic Publishers, pp. 1-23, 2001.
197) J.
R. Rice, N. Lapusta and K. Ranjith, "Rate and state dependent friction and
the stability of sliding between elastically deformable solids", Journal
of the Mechanics and Physics of Solids, 49, 1865-1898, 2001.
198) M.
L. Falk, A. Needleman and J. R. Rice, "A critical evaluation of cohesive
zone models of dynamic fracture", Journal de Physique IV, Proceedings, pp. Pr.5.43 - Pr.5.50,
2001.
199) J. R.
Rice, "Some studies of crack dynamics", in Physical Aspects of
Fracture
(Proceedings of NATO Advanced Study Institute on Physical Aspects of Fracture,
5-17 June 2000, Cargse, Corsica), edited by E. Bouchaud, D. Jeulin, C. Prioul
and S. Roux, Kluwer Academic Publishers, Dordrecht, pp. 3-11, 2001.
200) M. Ben
Amar and J. R. Rice, "Exact results with the J-integral applied to
free-boundary flows", Journal of Fluid Mechanics, 461, 321-341, 2002.
201) E.
Bouchaud, J. P. Bouchaud, D. S. Fisher, S. Ramanathan and J. R. Rice, "Can
crack front waves explain the roughness of cracks?", Journal of the
Mechanics and Physics of Solids, 50, 1703-1725, 2002.
202) M. Cocco
and J. R. Rice, "Pore pressure and poroelasticity effects in Coulomb
stress analysis of earthquake interactions", Journal of Geophysical
Research,
107(B2), cn:2030,
doi:10.1029/2000JB000138,
pp. ESE 2-1 to 2-17, February 2002.
203) A.
N. B. Poliakov, R. Dmowska and J. R. Rice, "Dynamic shear rupture
interactions with fault bends and off-axis secondary faulting", Journal
of Geophysical Research, 107(B11), cn:2295, doi:10.1029/2001JB000572, pp. ESE 6-1 to
6-18, November 2002.
204) K. R.
Felzer, T. W. Becker, R. E. Abercrombie, G. Ekstrom and J. R. Rice,
"Triggering of the 1999 MW 7.1 Hector Mine earthquake by aftershocks of
the 1992 MW 7.3 Landers earthquake", Journal of Geophysical Research, 107(B9), cn:2190, doi:10.1029/2001JB000911,
pp. ESE 6-1 to 6-13, September 2002.
205) N.
Lapusta and J. R. Rice, "Nucleation and early seismic propagation of small
and large events in a crustal earthquake model", Journal of Geophysical
Research,
108(B4), cn:2205,
doi:10.1029/2001JB000793,
pp. ESE 8-1 to 8-18, April 2003.
206) K. Uenishi
and J. R. Rice, "Universal nucleation length for slip-weakening rupture
instability under non-uniform fault loading", Journal of Geophysical
Research,
108(B1), cn:2042,
doi:10.1029/2001JB001681,
pp. ESE 17-1 to 17-14, January 2003.
207) N.
Kame, J. R. Rice and R. Dmowska, "Effects of pre-stress state and rupture
velocity on dynamic fault branching", Journal of Geophysical Research, 108(B5), cn:2265, doi:10.1029/2002JB002189, pp.
ESE 13-1 to 13-21, May 2003.
208) M.
Ben Amar, M. Brenner and J. R. Rice, "Cristallisation par onde acoustique:
le cas de l'Helium (Crystallization by acoustic waves: the case of
Helium)", Comptes Rendus de l'Acadmie des Sciences - Mcanique, Paris, 331 (9), pp. 601-607,
2003.
209) G.
G. Adams, J. R. Barber, M. Ciavarella and J. R. Rice, "A
paradox in sliding contact problems with friction", Journal of Applied
Mechanics,
72 (3), pp. 450-454, 2005.
210)
H. S. Bhat, R. Dmowska, J. R. Rice and N. Kame, "Dynamic slip transfer
from the Denali to Totschunda Faults, Alaska: Testing theory for fault
branching", Bulletin of the Seismological Society of America, 94(6B), pp. S202-S213, 2004.
211) J.
R. Rice, C. G. Sammis and R. Parsons, "Off-fault secondary failure induced
by a dynamic slip-pulse", Bulletin of the Seismological Society of
America,
95(1), pp. 109–134, doi: 10.1785/0120030166, 2005.
212) R.
E. Abercrombie and J. R. Rice, "Can observations of earthquake scaling
constrain slip weakening?", Geophysical Journal International, 162, pp.
406–424, doi: 10.1111/j.1365-246X.2005.02579.x, 2005.
213) S.
Fliss, H. S. Bhat, R. Dmowska and J. R. Rice, "Fault branching and rupture directivity", Journal of Geophysical
Research, 110, B06312,
doi:10.1029/2004JB003368, 22 pages, 2005.
214) Y.
Liu and J. R. Rice, "Aseismic slip transients emerge spontaneously in 3D
rate and state modeling of subduction earthquake sequences", Journal of
Geophysical Research, 110, B08307, doi:10.1029/2004JB003424, 14 pages, 2005.
215) K.
Xia, A. J. Rosakis, H. Kanamori and J. R. Rice, "Laboratory earthquakes
along inhomogeneous faults: Directionality and supershear", Science, 308
(5722), pp. 681-684, 29 April 2005.
216) J. R. Rice
and M. Cocco, "Seismic fault rheology and earthquake dynamics", in The Dynamics of Fault Zones, ed. M. R. Handy,
Dahlem Workshop (Berlin, January 2005) Report
95, The MIT Press, Cambridge, MA, USA, publication expected 2006-07.
217) J. R.
Rice, "Heating and weakening
of faults during earthquake slip", Journal of
Geophysical Research, 111, B05311, doi:10.1029/2005JB004006, 29 pages, 2006.
218) P.
Segall and J. R. Rice, "Does shear heating of pore fluid contribute to
earthquake nucleation?", Journal of Geophysical Research, 111, , B09316, doi: 10.1029/2005JB004129, 17 pages,
2006.
219)
A. W.
Rempel and J. R. Rice, "Thermal pressurization and onset of melting in
fault zones", Journal of Geophysical Research, 111, B09314, doi:
10.1029/2006JB004314, 18 pages, 2006.
220)
J. W. Rudnicki and J. R. Rice, "Effective normal stress alteration due to
pore pressure changes induced by dynamic slip propagation on a plane between
dissimilar materials", submitted to Journal of Geophysical Research, 111, B10308, doi:
10.1029/2006JB004396, 18 pages, 2006.
221)
H. S. Bhat, R. Dmowska, G. C. P. King, Y. Klinger and J. R. Rice,
"Off-fault damage patterns due to supershear ruptures with application to
the 2001 Mw 8.1 Kokoxili (Kunlun) Tibet earthquake", Journal of
Geophysical Research,
in press, 2007.
Items
submitted:
Internship
reports
(related full papers in preparation, partially including these):
M. Olives,
directed by H. S. Bhat, J. R. Rice and R. Dmowska,
"Finite fault branches and rupture dynamics: Is it time to look more
carefully at fault maps?", August 2004. (download)
A.
Baudet, directed by H.
S. Bhat, E. Templeton and J. R. Rice, "Finite
element modeling of laboratory experiments on impact and shear rupture of pre-faulted specimens", August 2004. (download)
Items
developed for teaching:
J. R. Rice, Solid
Mechanics
-- 84 pages, first distributed in 1994 and most recently revised in 2000;
provides an introduction to the continuum mechanics of solids, including its
historical development (download).
(Please seek permission of the author before reproducing for any purpose other
than individual study or use as course material. Parts closely follow, or are
expanded versions of, item 163 above.
Some parts have also been presented in a slightly different form, and generally
at a more advanced level, in item 186.)
J. R. Rice, Notes
on Elastodynamics, Green's Function, and Response to Transformation Strain and
Crack or Fault Sources -- 18 pages; for use in teaching on earthquake source
processes and advanced elasticity (download).
J. R. Rice, Elasticity
of Fluid-Infiltrated Porous Solids, 10 pages; for use in teaching on hydrology and
environmental geomechanics (download).
J. R. Rice, Homework
Problems / Class Notes on Mechanics of Finite Deformation -- 7 pages; for use in
teaching on advanced elasticity and plasticity (download).
J. R. Rice, Notes
on Convected Coordinates -- 1 page; for use in teaching on advanced elasticity and
plasticity (download).